Stainless steel tee‘s hydraulic bulging process is through the metal materials of axial compensation bulge out a kind of branch pipe forming process.
The process is to use special hydraulic press, with three links within the tube billet diameter equal injection liquid, through the two horizontal side of the hydraulic cylinder synchronization of the motion of tube billet, billet after squeezed smaller volume, smaller volume of liquid with the tube billet inside the tube billet and the pressure increases, when the stainless steel tee’s branch pipe bulge out to the pressure, the metal material in the liquid in the cylinder and the pipe pressure under the dual role of flow along the mold cavity and the branch pipe.
Stainless steel tee hydraulic bulging process can be a forming, high production efficiency; Stainless steel tee head and shoulders of wall thickness are increased.
Stainless steel tee:
By the hydraulic bulging process equipment for stainless steel tee tonnage is larger, the current domestic is mainly used for less than the standard of DN400 wall thickness in the manufacturing of stainless steel tee. Its applicable forming material for cold hardening tend to be relatively low low carbon steel, low alloy steel, stainless steel, including some non-ferrous metal materials, such as copper, aluminum, titanium, etc.
Tuesday, January 4, 2022
The hydraulic bulge forming technology of stainless steel tee
Related Posts:
Forming process of seamless pipe fittings (two)(2) seamless teeTee is a pipe for pipeline branch. For using seamless tube manufacturing tee is usually adopted by the process has two kinds of hydrau… Read More
Brief introduction of stainless steel elbowIn the pipeline system, stainless steel elbow is to change the direction of the line pipe fittings. Points according to the Angle 45 ° and 90 °、 180 °… Read More
Forming process for seamless pipe fittings (1)Seamless steel pipe refers to the use of seamless tube or steel manufacturing without weld pipe fittings. In recent years, due to the improvement of w… Read More
Main technological process of steel pipe fittings manufactureThe main technological process of steel pipe fittings manufactureBlanking forming (welding) surface heat treatment processing cutting nondestructive t… Read More
Cutting of stainless steel flangeStainless steel flange during processing, in addition to go through multi-channel heat treatment process, also need to use machining process, the main… Read More
Standard Reference for Seamless Steel Pipe
1. Seamless steel tube for structure (GB / T8162-1999) is a seamless steel pipe for general structure and mechanical structure. 2. Seamles...

0 comments:
Post a Comment