| Type | Seamless & Welded Pipe | Butt Weld Fittings | Flanges & Pressure Fittings |
| Sizes | 1/4″ thru 16″ | 1/2″ thru 12″ | All descriptions |
| Schedules | Sch 10, 40, 80, 160, & XXH | Sch 10, 40, 80, 160, & XXH | |
ASTM Standards
| Bar | Butt Weld Fittings | Forgings | Pipe, Welded & Seamless | Tube, Welded | Tube, Seamless | Plate |
| A276, A479 | A403 | A182 | A312 | A249 | A213 | A240 |
Minimum Physical Properties
| Tensile Strength | Yield Strength |
| 75 KSI Min. | 30 KSI Min. |
Chemical Composition (wt%)
| C | Mn | P | S | Si | Ni | Cr | Fe | Cb&Ta |
| 0.04 – 0.08 | 2.00 Max | 0.04 Max | 0.03 Max | 0.75 Max | 9.0 – 13.0 | 17.0 – 20.0 | Balance | 0.2 – 0.6 |
Properties
321 and 347 are austenitic stainless steels that contain stabilizing elements. Both alloys are easily welded. Annealing is not required after welding unless stress relief is desired. Both grades have excellent resistance to oxidation and corrosion. With high creep strength, these alloys work best up to 1600 degF. The addition of titanium in 321, and columbium plus tantalum in 347 give some desired characteristics:
* Prevents harmful carbide precipitation in the heat affected zone (HAZ) of the weld area
* Imparts substantial immunity to intergranular corrosion
* Reduced embrittlement in the HAZ of the weld area
Applications
Both alloys are common to the petroleum refining industries: they are used to make radiant superheaters, boiler tubes, high pressure steam pipes, and general refinery piping. They are also used for heavy duty exhaust systems and manifolds.
www.wilsonpipeline.com
.jpg)
0 comments:
Post a Comment