Stainless steel elbow classification: according to the angle, there are 45 degree stainless steel elbow and 90 degree stainless steel elbow, 180 degree stainless steel elbow three most commonly used, in addition, according to the needs of the project also includes 60 degree stainless steel elbow and other non normal angle bend.
Stainless steel elbow material: cast iron, stainless steel, alloy steel, cast iron and carbon steel can be calcined.
The connection between the pipe and the pipe is: direct welding (the most common way) flange connection, threaded connection with socket connection, etc..
According to the production process can be pided into: stainless steel welding elbow, stainless steel stamping elbow, stainless steel casting elbow, etc..
Pipe fitting used in the installation of a pipe, for the connection of the pipe bend.
Purpose: connect two nominal diameter of the same or different pipe, so that the pipeline for a certain angle turn.
1 material is pided into: carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, etc.. (but the wooden factory is pure forging)
2 pision of the production method can be pided into: pushing, pressing, forging, casting, etc.. (now it’s usually pure).
3 makes the standard can be pided into: GB, standard, water, electricity, American Standard German standard, Japanese standard etc..
4 according to its radius of curvature to pide: can be pided into long radius stainless steel elbow and short radius stainless steel elbow. Long radius stainless steel elbow refers to its radius of curvature is equal to 1.5 times the diameter of the tube, that is, R=1.5D. Short radius stainless steel elbow means that the radius of curvature is equal to the outer diameter of the pipe, that is, R=1.0D. (D is the diameter of the stainless steel elbow, R is the radius of curvature).
5 if according to the pressure level, about 17 kinds, and American Standard pipe is the same: sch5s, sch10s, sch10, sch20, sch30, sch40s, STD, sch40, sch60, sch80s, XS; sch80, SCH100, sch120, sch140, sch160, XXS. The most commonly used is two kinds of STD and XS.
Technical requirements:
1 because most of fittings for welding, in order to improve the welding quality, end vehicles into the groove, leave a certain angle, with boundary, this requirement is quite strict, edge thick, at an angle of number and range of deviation is provided. The surface quality and mechanical properties are basically the same as that of the tube. In order to convenient welding, steel pipe and the connecting pipe are the same.
2 The pipe fitting should be through the surface treatment, the inner and outer surface of the oxide scale through shot blasting, and then coated with anticorrosive paint. This is for export needs, in addition, in the country is to facilitate the transport to prevent rust oxidation, to do this work.
3 is the packaging requirements for small pipes, such as export, you need to do wooden box, about 1 cubic meter, this provision in the case the number of stainless steel elbows about not more than a ton, the standard allows the suit, large sets of small, but the total weight usually do not more than 1 ton. For large y to a single package, like 24 “must be a single package. The other is labeled packaging, labeling is to indicate size, number, batch number, manufacturer trademark etc.
Tuesday, January 4, 2022
Classification and technical requirements of stainless steel elbow
Related Posts:
Measures to prevent deformation of large flangeLarge flange in assembly welding. To avoid in the condition of bearing or bearing welds, try to eliminate the influence of external forces of weld bea… Read More
What Is Forged Pipe Fittings?The forged pipe fittings are mean that pipes are through the technology of forging.Commonly the forged pipe fittings includes:socket weld pipe fitting… Read More
The tolerance of butt welding pipe fitting productsA butt welding pipe fitting means the pipe fitting which has the connecting end for butt welding.Commonly the butt welding pipe fitting products inclu… Read More
Common Classification and Uses of Stainless Steel Angle BarStainless steel angle bar is widely used in a variety of stainless steel profiles, with structural stability, corrosion resistance, deformation resist… Read More
The Application and advantage of butt welding pipe fittingsThe application of butt welding pipe fittings: The butt welding pipe fitting end is connected to the end of pipes or fittings by butt welding joint, i… Read More
Standard Reference for Seamless Steel Pipe
1. Seamless steel tube for structure (GB / T8162-1999) is a seamless steel pipe for general structure and mechanical structure. 2. Seamles...

0 comments:
Post a Comment